WhatsMiner tools and firmware

1. The new WhatsMiner must need this tool to monitor and upgrading firmware;
2. High mode can be only supported by M5x and M3x series, also require the input voltage over than 230VAT，some functions can be supported only with new firmware;
3. Setting Power Limit function is available;
4. Multi-DNS proxy servers supported;
5. Improved the compatibility and stability of the tool, solved the issue which reported by anti-virus software by mistake.

Please read the operation guide or view the teaching video before using whatsminertool;

1. Applicable mode
1.1 M50S, M31S, M30S, M32 etc.；
1.2 High mode can be only supported, also require the input voltage over than 230VAT;
2. New version highlights
2.1 Support Pool TLS safety transportation protocol;
2.2 Support to check the PSU temp on WhatsMinerTool;
2.3 Strengthen the safety of firmware: device will reboot 2 times during upgrading,the version name will be end with"NeedUpgradeAgain" at 1st time，please wait for 2nd reboot, after that it will be changed to target version;
2.4 Fixing other bugs;
2.5 Online upgrading to version earlier than 20221009 is prohibit，suggest to match with tool whatsminertool-8.1.35；
2.6 The WhatsMiner API version is V2.0.5;

1. Applicable mode
1.1 M21S, M20S, M21,etc;
1.2 High mode can not be supported;
2. New version highlights
2.1 Support Pool TLS safety transportation protocol;
2.2 If the miner firmware is before 2021, it is recommended to upgrade the firmware after SD-card flashing;
2.3 Strengthen the safety of firmware: device will reboot 2 times during upgrading,the version name will be end with"NeedUpgradeAgain" at 1st time，please wait for 2nd reboot, after that it will be changed to target version;
2.4 Fixing other bugs;
2.5 Online upgrading to version earlier than 20210602 is prohibit，suggest to match with tool whatsminertool-8.1.34;
2.6 The WhatsMiner API version is V2.0.5;

1. Applicable mode
1.1 M10S, D1 etc;
1.2 Applicable to H6 control board;

1. Applicable mode
1.1 M3, M2 and M1 only;
1.2 Applicable to H3 control board;
1.3 Need to use old version of Whatsminertool to upgrade it;

1. Applicable mode
1.1 M5x, M3x and M2x series;
2. Details
2.1 H6os control board card brush system file, including instructions and burning software;
2.2 After that you will need to upgrade the latest firmware,if the miner is not upgraded, there will be error code 201-8410;

1. Applicable mode
1.1 WhatsMiner M10, D1;

1. Applicable mode
1.1 M5x and M3x series;
2. Details
2.1 H616 control board card flashing system file, including instructions and burning software;
2.2 After that you will need to upgrade the latest firmware,if the miner is not upgraded, there will be error code 201-8410;

1. Applicable mode
1.1 M3x, M2x series;
2. Details
2.1 H3 control board card brush system file, including instructions and burning software;
2.2 If 201-8410 error codes come out after flashing the program, then you need to upgrade the *.bin firmware with whatsminertool to solve it.

1. Applicable mode
1.1 WhatsMiner M3 only;

1. Applicable mode
1.1 WhatsMiner M10, D1 only;

1. Applicable mode
1.1 M3x, M2x series;
2. Details
2.1 H6 control board card brush system file, including instructions and burning software;
2.2 After that you will need to upgrade the latest firmware,if the miner is not upgraded, there will be error code 201-8410;

1. Applicable mode
1.1 WhatsMiner M10, D1;